Survivalist Training Tips and Equipment

How to Make Logs from Newspaper


Want to find a good way to make use of all those newspapers?  Plain newspaper won’t burn very long, but when you make them into logs they will burn much longer.

Step 1: Soak the Newspaper

The first thing you need to do is soak the newspaper it a sink or bucket. It helps to separate the newspapers into its smaller sections.

Step 2: Drain and Lay Out the Paper

After completely saturating the paper (usually by soaking for at least an hour) pull the paper from the water, let it drain completely and then lay it out into sections of 1-3 sheets — staggered much like fallen dominoes.

Step 3: Roll the Wet Newspaper Around a Dowel

Then take a dowel and roll the wet paper around it squeezing the paper as it’s rolled to ensure that it sticks together.

Step 4: Continue Rolling Until Desired Thickness is Acheived

Continue with the above step until you’ve rolled the newspaper log into your desired thickness.

Step 5: Thoroughly Dry your New Newspaper Log

Slide off the paper log and let it dry for a few days (a lot quicker if you place it on a woodstove, outside in the sun or in front of the heating vents. Basically anywhere where the moisture will come off quicker.

Lighting Your Newspaper Firewood

If you’ve made these correctly, they should be pretty dense. Because of this, you cannot simply take your bic and light them up like you would newspaper. Treat them just like any other wood log in that they require smaller sticks or kindling to light. And just like wood logs, you’ll need a good bed of coals or at least a pair of logs to maintain the burn.

These paper “logs” will also produce more ash than traditional logs. Just be sure they are completely dry before burning and you’ll be able surprised at the heat output that your old newspaper can give off.

We will be happy to hear your thoughts

Leave a Reply